ROCKBEN is a professional wholesale tool storage and workshop furniture supplier.
5-Drawer Modular Drawer Cabinet, 30''Wx23.6''Dx27.6''H
The E100711-5 is one of the lowest 30 inch modular drawer cabinet options in the range. With a 30"W x 23.6"D x 27.6"H body, it is designed for under-bench or low desktop storage. It gives workshops a wider drawer cabinet format while keeping the cabinet height low enough for compact bench-side layouts. The 5-drawer configuration uses three 100mm drawers and two 150mm drawers. This layout is suitable when the storage requirement is mainly organized access to small and medium-height items. It does not try to provide deep-drawer capacity; instead, it focuses on keeping useful drawer separation in a low industrial cabinet body.
The 30 inch width is valuable here because low cabinets can otherwise feel limited if the drawers are too narrow. Compared with a 22.5 inch low cabinet, the E100711-5 gives more horizontal drawer space for divider layouts and tool sets. The 600mm depth helps it fit standard work areas, while central locking and safety catch are included as standard. The interlocking system can be added upon request for this 23.6" depth.
• Low 5-drawer modular drawer cabinet for under-bench storage
• Three 100mm and two 150mm drawers for organized access
• 30 inch width provides more usable space than narrow low cabinets
• 23.6" depth fits compact workstation layouts
• Not intended as a desktop cabinet due to its 30" width
• Optional single-drawer interlocking system available upon request
DRAWER CONFIGURATION
Choose from three drawer load configurations based on your storage needs:
Type A: All drawers are equipped with 100kg load capacity
Type B: Drawers of 100mm height and below and equipped with 100kg load
capacity, while drawers of 125mm height and above are equipped with 200kg load capacity.
Type C: All drawers are equipped with 200kg load capacity
Divider Configuration
Keep every drawer organized with ROCKBEN adjustable divider sets. The partition-and-divider system allows each drawer to be divided into multiple compartments, making it easier to separate tools, spare parts, fasteners, measuring instruments, and production accessories.
BENCH HEIGHT CABINET
As a bench-height 30 inch modular drawer cabinet, the E100711-5 is built for workbench-side and workstation storage where tools need to stay close to the operator. Its 27.6" / 700mm height can fit under or beside suitable workbenches and can also provide a practical top surface for temporary tool placement. This makes it more useful as a standard industrial tool cabinet than a small desktop cabinet, especially when the workshop needs drawer capacity without occupying a wide floor area.
PRODUCT FEATURES
HEAVY DUTY STRUCTURE
ROCKBEN has always focused on building high-quality heavy-duty storage cabinets for demanding industrial environments. From the cabinet frame to the drawer slides and supporting structure, every key component is designed for strength, stability, and long-term daily use in workshops, tool rooms, production lines, and maintenance areas.
THICKER STEEL TO CARRY MORE
- Cabinet body start from 1.0 mm
- 1.2 - 2.0 mm for supporting sturctures
- 3.0 mm for drawer rail
ROCKBEN modular drawer cabinets are built with reinforced steel structures to support demanding industrial storage. The cabinet body has been tested to withstand a heavy load of up to 5,034 kg.
TESTED FOR LONG-TERM PERFORMANCE
ROCKBEN drawers are tested through 50,000+ loaded pull cycles to verify smooth operation, structural stability, and long-term performance under daily workshop use.
100KG - 200KG load capacity
ROCKBEN modular drawer cabinets are available with 100 kg or 200 kg drawer load capacity. Each drawer load option is tested with calibrated weights to support tools, parts, fixtures, molds, and other industrial storage needs.
BUilt-in Safety System
Workplace safety is a key part of ROCKBEN's cabinet design. Standard safety catch and central locking, together with the single-drawer interlocking system, help keep drawer storage more secure and controlled during daily operation.
CENTRAL LOCK
One central lock secures all drawers at the same time, helping keep valuable workshop equipment safely stored when the cabinet is not in use.
One key for each cabinet.
Single drawer interlocking system
The single-drawer interlocking system allows only one drawer to be opened at a time, helping reduce tipping risk when the cabinet is used for heavy parts storage.
Standard for 705mm-depth cabinets.
Available upon request for 600mm-depth cabinets.
SAfety catch
Each drawer is equipped with a safety catch to help prevent accidental drawer opening during daily operation, movement, or vibration in workshop environments. This design gives users better control when accessing stored tools and helps improve the safety of industrial drawer storage.
Frequently Asked Questions
Tel: +86 13916602750
Email: gsales@rockben.cn
WhatsApp: +86 13916602750
Address: 288 Hong An Road, zhu jing Town, Jin Shan districtrics, shanghai, china