ROCKBEN is a professional wholesale tool storage and workshop furniture supplier.
4-Drawer Modular Drawer Cabinet, 30''Wx23.6''Dx27.6''H
The E100711-4 is a 4-drawer 30 inch modular drawer cabinet for bench-height and workbench-side storage. Its 30"W x 23.6"D x 27.6"H, W762 x D600 x H700mm size gives operators a wider drawer than 22.5 inch models, while the cabinet remains practical for workstation layouts. At 27.6" / 700mm high, this low cabinet is for floor-standing use under or beside a bench, not for desktop placement. It keeps storage close to the operator while leaving more clearance above the cabinet.The layout uses 2 100mm drawers and 2 200mm drawers, giving fewer but more open storage zones for larger tools or boxed items. Two 200mm drawers make it the lowest 30 inch model with larger lower compartments.
The 23.6" / 600mm depth keeps the cabinet easier to place in standard workshop layouts, workbench-style combinations, and rows of multiple cabinets. It is useful when the cabinet needs to stay close to a workstation without taking too much aisle depth. For this depth, the interlocking system is available upon request. The cabinet can be specified with 100kg, mixed 100kg/200kg, or full 200kg drawer load configurations. Central locking and safety catch are standard; single-drawer interlocking is available upon request. As a bench-height industrial tool cabinet, the E100711-4 keeps tools close to the operator rather than in a distant tool room. It is a floor-standing cabinet for under-bench, beside-bench, or machine-side placement, not a desktop storage cabinet.
The key selection factor is the relationship between height, depth, and drawer configuration, not only the number of drawers.
• 30 inch / 762mm width balances capacity and footprint
• 27.6" / 700mm height matched to bench-height drawer cabinet use
• 23.6" / 600mm depth for standard workshop layouts
• 4-drawer layout: 2 100mm drawers and 2 200mm drawers
DRAWER CONFIGURATION
Choose from three drawer load configurations based on your storage needs:
Type A: All drawers are equipped with 100kg load capacity
Type B: Drawers of 100mm height and below and equipped with 100kg load
capacity, while drawers of 125mm height and above are equipped with 200kg load capacity.
Type C: All drawers are equipped with 200kg load capacity
Divider Configuration
Keep every drawer organized with ROCKBEN adjustable divider sets. The partition-and-divider system allows each drawer to be divided into multiple compartments, making it easier to separate tools, spare parts, fasteners, measuring instruments, and production accessories.
BENCH HEIGHT CABINET
The E100711-4 is a low bench-height modular drawer cabinet for layouts where a taller cabinet would interfere with the work area. Its 27.6" height keeps the cabinet below many bench structures, while the 4-drawer layout gives organized storage close to machines or assembly benches. The image should show the cabinet under or beside a bench, with the top used only for temporary tool placement.
PRODUCT FEATURES
HEAVY DUTY STRUCTURE
ROCKBEN has always focused on building high-quality heavy-duty storage cabinets for demanding industrial environments. From the cabinet frame to the drawer slides and supporting structure, every key component is designed for strength, stability, and long-term daily use in workshops, tool rooms, production lines, and maintenance areas.
THICKER STEEL TO CARRY MORE
- Cabinet body start from 1.0 mm
- 1.2 - 2.0 mm for supporting sturctures
- 3.0 mm for drawer rail
ROCKBEN modular drawer cabinets are built with reinforced steel structures to support demanding industrial storage. The cabinet body has been tested to withstand a heavy load of up to 5,034 kg.
TESTED FOR LONG-TERM PERFORMANCE
ROCKBEN drawers are tested through 50,000+ loaded pull cycles to verify smooth operation, structural stability, and long-term performance under daily workshop use.
100KG - 200KG load capacity
ROCKBEN modular drawer cabinets are available with 100 kg or 200 kg drawer load capacity. Each drawer load option is tested with calibrated weights to support tools, parts, fixtures, molds, and other industrial storage needs.
BUilt-in Safety System
Workplace safety is a key part of ROCKBEN's cabinet design. Standard safety catch and central locking, together with the single-drawer interlocking system, help keep drawer storage more secure and controlled during daily operation.
CENTRAL LOCK
One central lock secures all drawers at the same time, helping keep valuable workshop equipment safely stored when the cabinet is not in use.
One key for each cabinet.
Single drawer interlocking system
The single-drawer interlocking system allows only one drawer to be opened at a time, helping reduce tipping risk when the cabinet is used for heavy parts storage.
Standard for 705mm-depth cabinets.
Available upon request for 600mm-depth cabinets.
SAfety catch
Each drawer is equipped with a safety catch to help prevent accidental drawer opening during daily operation, movement, or vibration in workshop environments. This design gives users better control when accessing stored tools and helps improve the safety of industrial drawer storage.
Frequently Asked Questions
Tel: +86 13916602750
Email: gsales@rockben.cn
WhatsApp: +86 13916602750
Address: 288 Hong An Road, zhu jing Town, Jin Shan districtrics, shanghai, china